|
|
ENGINE E7J-A-2/60 10 10 - 28 ENGINE AND LOWER ENGINE UNITS The set is mounted in the crankcase in the previously established order, and it is made The jackets are blocked by means of MOT.484 stand. Mount connecting-rod bearings (connecting rod bearings are identical). The crankpins and the bearings are oiled. The bearing caps are mounted. On no. 1 cap (in the K area) a thin layer of The screws are tightened at 2.5 daNm, and then at an angle of 43 o +/-6 o . The axial play of the crankshaft is checked; it must be within: * 0.045 and 0.852 with wear; MOT. 484 THE CYLINDER CRANKCASE Take up the bearings of bearing on the housing cylinders. Half-be aring liners that are to be Be a ring liners a re ma tchning w ith the crankshaft in two classes, as follows : Marking on bearing linersMarking on crankshaft A Blue B Identification of matching classes on crankshaft is done by marking on the Crankshaft marking example : A A B A B RECOVERY ENGINE |