|
|
|
150 Driving and operating Instruction mode Move selector lever out of position D towards the left in position M. to a higher gear. shift to a lower gear. vehicle speed is too low, or a lower gear when vehicle speed is too high, the shift is not executed. This can cause a message in the Driver Information Centre. In instruction mode, no automatic shifting to a higher gear takes place at high engine revolutions. Gear shift indication The symbol R or S with a number beside it is indicated when gearshifting is recommended for fuel saving reasons. instruction mode. Electronic driving programmes ● Following a cold start, the operating temperature programme increases engine speed to quickly bring the catalytic converter to the required temperature. ● Special programmes automatically adapt the shifting points when driving up inclines or down hills. ● In snowy or icy conditions or on other slippery surfaces, the electronic transmission control enables the driver to select instructionly first, second or third gear for starting off. Kickdown Pressing down the accelerator pedal beyond the kickdown detent will lead to maximum acceleration independent of selected driving mode. The transmission shifts to a lower gear depending on engine speed. Fault In the event of a fault a message is displayed in the Driver Information Centre. Vehicle messages 3 105. enables only third gear. The transmission no longer shifts automatically. by a workshop. |