|
|
|
70 Storage Align the bicycle in the longitudinal direction of the vehicle: Slightly loosen the pedal mount. rotary lever on the pedal crank recess. another, the relative positions of the bicycles can be adapted by adjusting the wheel recesses and the rotary lever on the pedal crank recess until the bicycles no longer touch one another. Make sure there is sufficient clearance from the vehicle. Tighten the attachment screw for the pedal bearing mount to its maximum point by hand. recesses using strap retainers. secure. Caution Ensure gap between bicycle and vehicle is at least 5 cm. If necessary, loosen handlebar and swivel sideways. The settings for the wheel recesses and on the rotary lever on the pedal crank recess should be noted and saved for each bicycle. Correct presetting will facilitate refitting of the bicycle. Note It is recommended to attach a warning sign at the rearmost bicycle to increase visibility. Removing a bicycle from the rear carrier system Undo strap retainers on both bicycle tyres. |