|
|
00 – 10 SERVICE INFORMATION Problem Possible Cause Correction STEERING COLUMN (CONT.) TURN SIGNAL SWITCH This troubleshooting covers mechanical problems only. See Section 8 for turn signal switch electrical Turn Signal Will Not Stay Turn Signal Will Not Turn Signal Difficult to Turn Signal Will Not Hezard Switch Cannot Be No Turn Signal Lights Front or Rear Turn Signal 1. Foreign material or loose parts preventing movement of yoke. 2. Broken or missing detent or canceling spring. 1. Loose switch mounting screws. detent, return or canceling spring. 4. Worn canceling cam. 1. Turn signal switch arm loose. screws. 1. Broken lane change pressure pad or spring hanger. 2. Broken, missing or misplaced lane change spring. 3. Base of wire damaged. 1. Foreign material between hazard switch to turn signal switch body. 1. Electrical failure in chassis harness. 2. Inoperative turn signal flasher unit. 1. Burned-out damaged turn signal bulb. at bulb socket. 3. Loose chassis harness connector. Repair or replace signal switch. Replace signal switch. Tighten mounting screws. Replace turn signal switch. Tighten arm screw. Replace turn signal switch. Replace turn signal switch. Replace turn signal switch. Repair or replace hazard Refer to Section 8 “Electrical Replace bulb. Repair loose connector. |