|
|
|
GENERAL INFORMATION 0A–11 RECOMMENDED LIQUID GASKET * RTV: Room Temperature Vulcanizer NOTE: 1. It is very important that the liquid gaskets listed above or their exact equivalent be used on the vehicle. Follow the manufacturer’s instructions at all times. 3. Be absolutely sure to remove all lubricants and moisture from the connecting surfaces before applying the liquid gasket. The connecting surfaces must be perfectly dry. 4. Do not apply LOCTITE 515 and LOCTITE 518 between two metal surfaces having a clearance of greater than 0.25 mm (0.01 in). Poor adhesion will result. RECOMMENDED THREAD LOCKING AGENTS NOTE: When the application procedures are specified in this manual, follow them. Type Brand Name Manufacturer Remarks RTV* Three Bond 1207B Three Bond For Engine Repairs Silicon Base Three Bond 1207C Three Bond Three Bond 1215 Three Bond For Axle Case Three Bond 1280 Three Bond Repairs. T/M Water Base Three Bond 1141E Three Bond For Engine Repairs Three Bond 1104 Three Bond Belco Bond 4 Isuzu Solvent Belco Bond 401 Isuzu For Engine Repairs Belco Bond 402 Isuzu LOCTITE 515 Loctite Anaerobic LOCTITE 518 Loctite All LOCTITE Type LOCTITE Color Application Steps LOCTITE 242 Blue LOCTITE 262 Red LOCTITE 270 Green LOCTITE 271 Red 1. Completely remove all lubricant and moisture from the bolts and the female threaded surfaces of the parts to be joined. 2. Apply LOCTITE to the bolts. Apply LOCTITE to at least 1/3 of the 3. Tighten the bolts to the specified torque. After tightening, be sure to keep the bolts free from vibration |