|
|
6E–190 4JX1–TC ENGINE DRIVEABILITY AND EMISSIONS Cuts Out, Symptom (Cont'd) Step No Yes Value(s) Action 9 1. Injector Test Operate the each injector by Tech 2 with the 2. If a problem is found, check the harness or replace the injector. Is the action complete? — Verify repair Go to Step 10 10 1. Check the following engine mechanical items. Refer to Engine Mechanical for diagnosis procedures: D Low compression D Sticking or leaking valves D Worn camshaft lobe(s) D Camshaft drive belt slipped or stripped D Incorrect valve timing D Broken valve springs 2. If a problem is found, repair as necessary. Was a problem found? — Verify repair Go to Step 11 11 1. Check for faulty motor mounts. Refer to Engine Mechanical for inspection of mounts. 2. If a problem is found, repair as necessary. Was a problem found? — Verify repair Go to Step 12 12 1. Review all diagnostic procedures within this table. malfunctions have been found, review/inspect the D Visual/physical inspection D Tech 2 data D Freeze Frame data/Failure Records butter D All electrical connections within a suspected 3. If a problem is found, repair as necessary. Was a problem found? — Verify repair Contact Technical Assistance |