|
|
Content .. 1772 1773 1774 1775 ..
SECURITY AND LOCKS 8H–25 ID Code Additional Registration This procedure additionally registers a new received ID Step Action Yes No 1 1. Confirm that all the doors are closed and unlocked. Is the action complete? Go to Step 2 Go to Step 1 2 Turn the starter switch to ACC position and then to OFF position NOTE: This step must be carried out within five seconds after Is the action complete? Go to Step 3 Go to Step 1 3 Close the driver’s side door and then open it two times. NOTE: This step must be carried out within ten seconds after Is the action complete? Go to Step 4 Go to Step 1 4 1. Turn the starter switch to ACC position and then to OFF position three times. 2. Close the driver’s side door and then open it. NOTE: This step must be carried out within ten seconds after Is the action complete? Go to Step 5 Go to Step 1 5 The control unit locks and unlocks the doors two times. Does the control unit work normally? Go to Step 6 Go to Step 1 6 Operate the lock or unlock button of the transmitter. NOTE: This step must be carried out within twenty seconds Is the action complete? Go to Step 7 Go to Step 1 7 The control unit locks and unlocks the doors one time. Does the control unit work normally? Go to Step 8 Go to Step 1 8 Operate the lock or unlock button of the transmitter. NOTE: This step must be carried out within twenty seconds Is the action complete? Go to Step 9 Go to Step 1 9 The control unit compares the two codes sent from the NOTE: In any case, this procedure is finished. Go to Step 1 Go to Step 1 |