|
|
Content .. 1327 1328 1329 1330 ..
6A – 66 ENGINE MECHANICAL (For example) Legend (1) Part Number 13. Remove harness connector from each injector. NOTE: Do not drop O-ring INSTALLATION 1. Install oil rail, tighten temporarily NOTE: Do not forget to install between injector and oil 3. Install injector fixing bolts, tighten temporarily. Torque: 6.5 N·m (0.7 kg·m / 5.1 lb ft) with special method. Torque: 30 N·m (3.1 kg·m / 22 lb ft) then loose a Torque: 25 N·m (2.4 kg·m / 17.4 lb ft) Torque: 20 N·m (2.0 kg·m / 14.5 lb ft) harness connecter to injector. 9. Record the identification marking of injector for each cylinder that is indicated on the upper portion Legend (1) Part Number 10. Install cylinder head assembly. Refer to “Cylinder Head” in this manual. 11. Fill with about 300cc of engine oil from the high pressure oil pipe at the high pressure oil pipe 1 4 3 2 6 5 055RW021-1 1 4 3 2 6 5 055RW021-1 Identification One Alphabet One Numeral Marking Letter Letter Grade A 1 A A 2 A 3 B 1 B B 2 B 3 C 1 C C 2 C 3 |