|
|
Content .. 1250 1251 1252 1253 ..
6G–12 ENGINE LUBRICATION Oil Pump Oil Seal Removal 1. Disconnect battery ground cable. D Refer to removal procedure for Crankshaft Pulley in 4. Remove timing belt. D Refer to removal procedure for Timing Belt in this 5. Remove timing pulley from crankshaft. NOTE: Take care not to damage sealing surfaces of oil Installation 1. Install oil pump oil seal, apply engine oil to oil seal lip, then install oil seal using 5–8840–2287–0 installer. 015RS001 2. Install timing pulley to crankshaft. D Refer to installation procedure for Timing Belt in this 4. Install crankshaft pulley. D Refer to installation procedure for Crankshaft 5. Refill engine oil until full level. |