|
|
|
Content .. 1045 1046 1047 1048 ..
4C–5 DRIVE SHAFT SYSTEM 7. Remove the parking brake cable mounting bolts(Behind the back plate)(1). 311RS001 8. Remove the bearing holder mounting nuts. NOTE: Be sure not to damage the oil seal. 10. Remove snap ring. 11. Using a bearing remover 5–8840–2295–0 and press, remove retainer together with the bearing holder. 420RW024 12. Remove bearing. 15. Remove the wheel pins using a remover 5–8840–0079–0. 420RW023 Inspection and Repair Make necessary correction or parts replacement if wear, Visual Check: Check the following parts for wear, damage, noise or any 1. Axle shaft When checking the axle shaft, pay special attention to the 420RS008 |