|
|
DISASSEMBLY 1. Remove valves at parallel pins. I Do not use a magnetic hand. a. Use a wire paper clip to push out parallel pins. b. Remove parallel pins while pressing their corresponding plugs and sleeves. I Remove plug slowly to prevent internal parts from jumping c. Place mating surface of valve facedown, and remove internal parts. I If a valve is hard to remove, place valve body facedown I Be careful not to drop or damage valves and sleeves. 2. Remove valves at retainer plates. SAT834A SAT822A SAT823A SAT824A SAT825A REPAIR FOR COMPONENT PARTS Control Valve Upper Body (Cont’d) AT-145 |