|
|
ST-12 < UNIT REMOVAL AND INSTALLATION > HYDRAULIC LINE Installation is in the reverse order of removal. CAUTION: Do not reuse O-rings. • Confirm mating marks are aligned with hose and clamp, then cor- rect if needed. • To install eye joint, align projection (2) of eye joint with notch of power steering pump, and attach eye joint to power steering pump properly. Tighten eye bolt by hand fully, then torque to specifica- tion. (1) Pressure sensor (3) Copper sealing washers (4) O-ring CAUTION: Do not reuse O-rings or copper sealing washers. 7. Eye bolt 8. O-ring 9. Power steering pressure sensor 10 O-ring A. Power steering reservoir attachment B. Power steering pump connection C. Steering gear connections Front SGIA0563E ALGIA0102ZZ |