|
|
POWER WINDOW MOTOR PWC-29 < DTC/CIRCUIT DIAGNOSIS > C D E F G H I J L M A B PWC N O P 1. Turn ignition switch OFF. 2. Disconnect rear power window switch LH. 3. Check continuity between rear power window switch LH connec- tor (A) and rear power window motor LH connector (B). 4. Check continuity between rear power window switch LH connec- tor (A) and ground. Is the inspection result normal? YES >> GO TO 3 NO >> Repair or replace harness. 3. CHECK REAR POWER WINDOW MOTOR LH Check rear power window motor LH. PWC-29, "REAR LH : Component Inspection" Is the inspection result normal? YES >> Check intermittent incident. Refer to GI-42, "Intermittent Incident" . NO >> Replace rear power window motor LH. Refer to GW-22, "Rear Door Glass Regulator Assembly" REAR LH : Component Inspection INFOID:0000000009878968 COMPONENT INSPECTION 1. CHECK REAR POWER WINDOW MOTOR LH Does motor operate by connecting the battery voltage directly to rear power window motor LH? Is the inspection result normal? YES >> Rear power window motor LH is OK. NO >> Replace rear power window motor LH. Refer to GW-22, "Rear Door Glass Regulator Assembly" REAR RH INFOID:0000000009878969 Door glass moves UP/DOWN by receiving the signal from main power window and door lock/unlock switch or rear power window switch RH. REAR RH : Component Function Check INFOID:0000000009878970 1. CHECK REAR POWER WINDOW MOTOR RH CIRCUIT Does rear power window motor RH operate with operating main power window and door lock/unlock switch or rear power window switch RH? Rear power window switch LH connector Terminal Rear power window Terminal Continuity D203 (A) 5 D204 (B) 2 Yes 4 1 Rear power window switch LH connector Terminal Ground Continuity D203 (A) 5 No 4 ALKIA1036GB Terminal Motor condition (+) (–) 2 1 DOWN 1 2 UP |