|
|
SB-8 < REMOVAL AND INSTALLATION > FRONT SEAT BELT a. Turn ignition switch ON. The seat belt warning lamp should illuminate. b. Fasten driver seat belt. The seat belt warning lamp should turn OFF. 2. If the air bag warning lamp is blinking, perform self-diagnosis using CONSULT and air bag warning lamp. SRC-18, "Diagnosis Description" 3. Check that the seat belt retractor, seat belt anchor and buckle bolts are tightened firmly. 4. Repeat steps above if necessary to check the other seat belts. SEAT BELT BUCKLE : Exploded View INFOID:0000000009945632 SEAT BELT BUCKLE : Removal and Installation INFOID:0000000009945633 REMOVAL Remove the seat belt buckle. SE-14, "Removal and Installation" . (for ease of tool operation in narrow space.) • Remove seat cushion inner finisher. Refer to . • Remove the seat belt buckle harness connector and harness clamp. INSTALLATION Install in the reverse order of removal. 1. Anchor bolt 2. Wave washer 3. Seat belt buckle harness connector 4. Seat belt buckle 5. Retaining washer : Clip : N·m (kg-m, ft-lb) JMHIA1318GB |