|
|
DIAGNOSIS SYSTEM (IPDM E/R) (WITHOUT INTELLIGENT KEY SYSTEM) WW-23 < SYSTEM DESCRIPTION > C D E F G H I J K M A B WW N O P ECU IDENTIFICATION The IPDM E/R part number is displayed. SELF DIAGNOSTIC RESULT DATA MONITOR ACTIVE TEST Active Test The IPDM E/R activates outputs to test components. CAN Diag Support Mntr The result of transmit/receive diagnosis of CAN communication is displayed. Direct Diagnostic Mode Description Monitor Item [Unit] Main Signals Description MOTOR FAN REQ [1/2/3/4] × Indicates cooling fan speed signal received from ECM on CAN communication AC COMP REQ [On/Off] × Indicates A/C compressor request signal received from ECM on CAN commu- TAIL&CLR REQ [On/Off] × Indicates position light request signal received from BCM on CAN communica- HL LO REQ [On/Off] × Indicates low beam request signal received from BCM on CAN communication HL HI REQ [On/Off] × Indicates high beam request signal received from BCM on CAN communication FR FOG REQ [On/Off] × Indicates front fog light request signal received from BCM on CAN communica- FR WIP REQ [Stop/1LOW/Low/Hi] × Indicates front wiper request signal received from BCM on CAN communication WIP AUTO STOP [STOP P/ACT P] × Indicates condition of front wiper auto stop signal WIP PROT [Off/BLOCK] × Indicates condition of front wiper fail-safe operation IGN RLY1 -REQ [On/Off] Indicates ignition switch ON signal received from BCM on CAN communication IGN RLY [On/Off] × Indicates condition of ignition relay PUSH SW [On/Off] Indicates condition of push-button ignition switch INTER/NP SW [On/Off] Indicates condition of CVT shift position ST RLY CONT [On/Off] Indicates starter relay status signal received from BCM on CAN communication IHBT RLY -REQ [On/Off] Indicates starter control relay signal received from BCM on CAN communication ST/INHI RLY [Off/ ST /INHI] Indicates condition of starter relay and starter control relay DETENT SW [On/Off] Indicates condition of CVT shift selector (park position switch) DTRL REQ [Off] Indicates daytime light request signal received from BCM on CAN communica- THFT HRN REQ [On/Off] Indicates theft warning horn request signal received from BCM on CAN commu- HORN CHIRP [On/Off] Indicates horn reminder signal received from BCM on CAN communication line Test item Description HORN This test is able to check horn operation [On]. FRONT WIPER This test is able to check wiper motor operation [Hi/Lo/Off]. MOTOR FAN This test is able to check cooling fan operation [4/3/2/1]. EXTERNAL LAMPS This test is able to check external lamp operation [Fog/Hi/Lo/TAIL/Off]. |