|
|
PWO-6 < REMOVAL AND INSTALLATION > CONSOLE POWER SOCKET REMOVAL AND INSTALLATION CONSOLE POWER SOCKET Removal and Installation INFOID:0000000009567678 CONSOLE POWER SOCKET or CIGARETTE LIGHTER (IF EQUIPPED) REMOVAL NOTE: If unable to use the tool because of power socket location or access to the harness connector, then further removal of interior components may be required. Refer to IP-18, "Removal and Installation" . 1. Insert one side of Tool (A) into one of the square holes inside the power socket. 2. Lift up the handle of the Tool as shown ( ) until the other side snaps into the other square hole in the power socket. 3. Pull the power socket straight out with the Tool. 4. Disconnect the harness connector from the power socket. with a suitable tool. INSTALLATION Installation is in the reverse order of removal. NOTE: Make sure to align the tabs with the square notched areas as shown ) during installation. Tool number: — (J-42059) AWMIA1182GB WKIA1035E AWMIA1183GB |