|
|
PCS-82 < DTC/CIRCUIT DIAGNOSIS > [POWER DISTRIBUTION SYSTEM] U1000 CAN COMM CIRCUIT DTC/CIRCUIT DIAGNOSIS U1000 CAN COMM CIRCUIT Description INFOID:0000000009726134 LAN-24, "CAN COMMUNICATION SYSTEM : System Description" . DTC Logic INFOID:0000000009726135 DTC DETECTION LOGIC NOTE: U1000 can be set if a module harness was disconnected and reconnected, perhaps during a repair. Confirm that there are actual CAN diagnostic symptoms and a present DTC by performing the Self Diagnostic Result procedure. Diagnosis Procedure INFOID:0000000009726136 1. PERFORM SELF DIAGNOSTIC RESULT 1. Turn ignition switch ON and wait for 2 second or more. 2. Check “SELF- DIAG RESULTS”. YES >> Perform CAN Diagnosis as described in DIAGNOSIS section of CONSULT Operation instruction. NO >> Refer to GI-41, "Intermittent Incident" . CONSULT Display DTC Detection Condition Possible Cause CAN COMM CIRCUIT When any listed module cannot communicate In CAN communication system, any item (or |