|
|
REAR DOOR FINISHER INT-19 < REMOVAL AND INSTALLATION > C D E F G H I K L M A B INT N O P 3. Remove screw (B) from power window and door lock/unlock switch (RH) finisher. 4. Remove power window and door lock/unlock switch (RH) fin- isher (1) using a suitable tool (A). : Pawl 5. Disconnect the harness connector from the power window and door lock/unlock switch (RH). 7. Release rear door finisher clips using a suitable tool (A) and remove rear door finisher as shown. : Clip INSTALLATION Installation is in the reverse order of removal. CAUTION: • Visually check the clips and pawls for deformation and damage during installation. • When installing rear door finisher, check that clips and pawls are securely placed into door panel holes. REMOVAL - MANUAL WINDOW 1. Release rear door corner finisher clip using a suitable tool. AWJIA1140ZZ JMJIA6028ZZ |