|
|
FRONT WHEEL HUB AND KNUCKLE FAX-11 < REMOVAL AND INSTALLATION > C E F G H I J K L M A B FAX N O P • Clean the mating surfaces of drive shaft, wheel hub, and wheel bearing. Apply Molykote M77 to surface (A) of joint sub-assembly. CAUTION: Apply Molykote M77 to cover entire flat surface of joint sub- assembly. NOTE: Always check with the Parts Department for the latest parts infor- mation. • When reusing disc rotor, align the matching marks during removal. • When installing a cotter pin, securely bend the cotter pin to prevent rattles. CAUTION: Do not reuse cotter pin. Disassembly and Assembly INFOID:0000000009521204 DISASSEMBLY 1. Remove wheel hub using Tool. 2. Remove splash guard from steering knuckle. 3. Remove wheel bearing inner race (outer side) from wheel hub using Tools. 4. Remove snap ring from steering knuckle using suitable tool. CAUTION: Do not damage steering knuckle. 5. Remove wheel bearing from steering knuckle using Tool. Molykote M77 quantity : JSDIA2844ZZ Tool number : ST33710000 ( — ) SDIA0758J Tool number : ST33710000 ( — ) SDIA0759J Tool number : ST35321000 ( — ) SDIA0760J |