|
|
HOOD DLK-137 < REMOVAL AND INSTALLATION > [WITH INTELLIGENT KEY SYSTEM] C D E F G H I J L M A B DLK N O P CLEARANCE ADJUSTMENT 1. Loosen hood hinge nuts and bolts. HEIGHT ADJUSTMENT 1. Loosen hood lock assembly bolts. the specified values by rotating hood bumper rubber. 3. Temporarily tighten hood lock assembly bolts. mm (7.87 in) height or by pressing hood lightly [approximately 29 N (3.0 kg, 6.5 lb)]. 5. After adjustment, tighten hood lock assembly bolts to specified torque. HOOD HINGE INFOID:0000000009486659 REMOVAL 1. Remove hood assembly. Refer to DLK-135, "HOOD ASSEMBLY : Removal and Installation" 2. Remove front fender. Refer to DLK-142, "Removal and Installation" 3. Remove cowl top side cover. Refer to . 4. Remove hood hinge bolts and hood hinge. INSTALLATION Installation is in the reverse order of removal. CAUTION: • Before installing the hood hinge, apply anticorrosive agent onto the surface of the vehicle. C – C H Clearance 3.5 ± 1.0 (0.14 ± 0.04) 1.5 (0.06) 1.5 (0.06) J Surface height 0.0 ± 1.5 (0.0 ± 0.06) 1.5 (0.06) 1.5 (0.06) Section Item Measurement Standard Parallelism Equality 1. Hood striker 2. Secondary latch 3. Primary latch A. 20.0 mm (0.79 in) ALKIA3162ZZ |