|
|
BRC-28 < SYSTEM DESCRIPTION > [VDC/TCS/ABS] SYSTEM DTC Malfunction detected condition Fail-safe condition C1101 When an open circuit is detected in rear RH wheel sensor circuit. The following functions are sus- are malfunctioning) C1102 When an open circuit is detected in rear LH wheel sensor circuit. C1103 When an open circuit is detected in front RH wheel sensor circuit. C1104 When an open circuit is detected in front LH wheel sensor circuit. C1105 • When a short circuit is detected in rear RH wheel sensor circuit. ≥ Rear RH wheel sensor pow- er supply voltage • When distance between rear RH wheel sensor and rear RH wheel sensor rotor is large. • When installation of rear RH wheel sensor or rear RH wheel sensor rotor is not normal. C1106 • When a short circuit is detected in rear LH wheel sensor circuit. ≥ Rear LH wheel sensor power supply voltage • When distance between rear LH wheel sensor and rear LH wheel sensor rotor is large. • When installation of rear LH wheel sensor or rear LH wheel sensor rotor is not nor- mal. C1107 • When a short circuit is detected in front RH wheel sensor circuit. ≥ Front RH wheel sensor power supply voltage • When distance between front RH wheel sensor and front RH wheel sensor rotor is large. • When installation of front RH wheel sensor or front RH wheel sensor rotor is not normal. C1108 • When a short circuit is detected in front LH wheel sensor circuit. ≥ Front LH wheel sensor pow- er supply voltage • When distance between front LH wheel sensor and front LH wheel sensor rotor is large. • When installation of front LH wheel sensor or front LH wheel sensor rotor is not normal. C1109 • When ignition power supply voltage is in following state. ≥ Ignition power supply voltage. - Ignition power supply voltage: 16 V ≤ Ignition power supply voltage. The following functions are sus- C1110 When there is an internal malfunction in the ABS actuator and electric unit (control C1111 When a malfunction is detected in motor or motor relay. The following functions are sus- C1115 When difference in wheel speed between any wheel and others is detected when The following functions are sus- C1116 When stop lamp switch signal is not input when brake pedal operates. The following functions are sus- |