Nissan Versa Sedan. Instruction - part 602

 

  Index      Nissan     Nissan Versa Sedan (2014 year) - Service and Repair Instruction

 

Search            copyright infringement  

 

 

 

 

 

 

 

 

 

Content   ..  600  601  602  603   ..

 

 

Nissan Versa Sedan. Instruction - part 602

 

 

PB-2

< PRECAUTION >

PRECAUTIONS

PRECAUTION

PRECAUTIONS

Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT 
PRE-TENSIONER"

INFOID:0000000009266936

The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along

with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger for certain

types of collision. This system includes seat belt switch inputs and dual stage front air bag modules. The SRS

system uses the seat belt switches to determine the front air bag deployment, and may only deploy one front

air bag, depending on the severity of a collision and whether the front occupants are belted or unbelted.

Information necessary to service the system safely is included in the SR and SB section of this Service Man-

ual.

WARNING:

• To avoid rendering the SRS inoperative, which could increase the risk of personal injury or death in

the event of a collision which would result in air bag inflation, all maintenance must be performed by

an authorized NISSAN/INFINITI dealer.

• Improper maintenance, including incorrect removal and installation of the SRS, can lead to personal

injury caused by unintentional activation of the system. For removal of Spiral Cable and Air Bag

Module, see the SR section.

• Do not use electrical test equipment on any circuit related to the SRS unless instructed to in this

Service Instruction. SRS wiring harnesses can be identified by yellow and/or orange harnesses or har-

ness connectors.

PRECAUTIONS WHEN USING POWER TOOLS (AIR OR ELECTRIC) AND HAMMERS

WARNING:

• When working near the Airbag Diagnosis Sensor Unit or other Airbag System sensors with the Igni-

tion ON or engine running, DO NOT use air or electric power tools or strike near the sensor(s) with a

hammer. Heavy vibration could activate the sensor(s) and deploy the air bag(s), possibly causing

serious injury.

• When using air or electric power tools or hammers, always switch the Ignition OFF, disconnect the

battery, and wait at least 3 minutes before performing any service.

PREPARATION

PB-3

< PREPARATION >

C

D

E

G

H

I

J

K

L

M

A

B

PB

N

O

P

PREPARATION

PREPARATION

Commercial Service Tool

INFOID:0000000009266937

Tool name

Description

Brake drum clearance gauge

Measuring rear rotor drum inner diameter 

Power tool

Loosening nuts, screws and bolts

WFIA0167E

PIIB1407E

PB-4

< PERIODIC MAINTENANCE >

PARKING BRAKE SYSTEM

PERIODIC MAINTENANCE

PARKING BRAKE SYSTEM

Inspection and Adjustment

INFOID:0000000009266938

INSPECTION

When parking brake lever is operated with a force of 196 N (20 kg-f,

44 lb-f), make sure parking brake lever stroke is within the specified

number of notches. (Check it by listening and counting ratchet

clicks.) 

ADJUSTMENT

1. Pull parking brake lever until the access hole (1) is visible. Insert

a socket wrench onto the adjusting nut (A).

2. Turn the adjusting nut with a socket wrench to loosen the front

cable.

3. Depress the brake pedal with a force of 196 N (20 kg-f, 44 lb-f) about 10 times and adjust the brake shoe

clearance.

CAUTION:

Make sure to securely operate the brake pedal.

4. Check inner diameter of rear brake drum. Refer to 

BR-17, "BRAKE DRUM : Inspection and Adjustment"

.

5. Adjust the cable with the following procedure.
a. Operate the parking brake lever with a force of 400 N (41 kg-f, 90 lb-f) for 25 minutes or longer.
b. Adjust the parking brake lever stroke by turning the adjusting nut with a socket wrench.

CAUTION:

Do not reuse the adjusting nut if the nut is removed.

c.

Operate the parking brake lever with a force of 196 N (20 kg-f, 44 lb-f). Check that the lever stroke is

within the specified number of notches. (Check it by listening to the clicks of the ratchet.)

Number of notches : Refer to 

PB-8, "Parking Brake 

Control"

.

WFIA0508E

AWFIA0805ZZ

PARKING BRAKE SYSTEM

PB-5

< PERIODIC MAINTENANCE >

C

D

E

G

H

I

J

K

L

M

A

B

PB

N

O

P

d. Rotate the brake drum with the parking brake lever released and verify that there is no drag present. Refer

to 

BR-17, "BRAKE DRUM : Inspection and Adjustment"

.

Number of notches

: Refer to 

PB-8, "Parking Brake Control"

.

 

 

 

 

 

 

 

Content   ..  600  601  602  603   ..