Nissan Versa Sedan. Instruction - part 519

FRONT DOOR FINISHER

INT-15

< REMOVAL AND INSTALLATION >

C

D

E

F

G

H

I

K

L

M

A

B

INT

N

O

P

REMOVAL AND INSTALLATION

FRONT DOOR FINISHER

Exploded View

INFOID:0000000009269466

NOTE:

LH side shown; RH side similar.

Removal and Installation

INFOID:0000000009269467

REMOVAL

1. Fully open front door window.
2. Remove front door corner finisher. Refer to 

MIR-17, "FRONT DOOR CORNER FINISHER : Removal and

Installation"

.

3. Remove power window and door lock/unlock switch and finisher as an assembly (if equipped). Refer to

PWC-52, "Removal and Installation"

 (LH) or 

PWC-53, "Removal and Installation"

 (RH).

1.

Front door panel

2.

Front door finisher

3.

Main power window and door lock/
unlock switch finisher (if equipped)

4.

Front door corner finisher

5.

Grommet

Metal clip

Clip

Pawl

AWJIA0721ZZ

INT-16

< REMOVAL AND INSTALLATION >

FRONT DOOR FINISHER

4. Remove front door finisher.
a. Remove front door finisher bolt (A).

b. Release front door finisher clips and metal clips using a suitable

tool (A) and remove front door finisher as shown.

: Clip
: Metal clip

CAUTION:

Apply protective tape (B) on the door panel and/or door fin-

isher to protect from damage.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

When installing front door finisher, make sure the clips and metal clips are securely pressed into door

panel holes.

JMJIA6023ZZ

AWJIA0722ZZ

REAR DOOR FINISHER

INT-17

< REMOVAL AND INSTALLATION >

C

D

E

F

G

H

I

K

L

M

A

B

INT

N

O

P

REAR DOOR FINISHER

Exploded View

INFOID:0000000009269468

Removal and Installation

INFOID:0000000009269469

REMOVAL

1. Fully open rear door window.

1.

Rear door panel

2.

Rear door finisher

3.

Rear power window switch finisher (if 
equipped)

4.

Grommet

Clip

Metal clip

Pawl

AWJIA0724ZZ

INT-18

< REMOVAL AND INSTALLATION >

REAR DOOR FINISHER

2. Remove rear door finisher clip (A).

3. Remove rear power window switch and finisher as an assembly (if equipped). Refer to 

PWC-54,

"Removal and Installation"

.

4. Remove rear door finisher.
a. Remove rear door finisher bolt (A).

b. Release rear door finisher clips and metal clips using a suitable

tool (A) and remove rear door finisher as shown.

: Clip
: Metal clip

CAUTION:

Apply protective tape (B) on the door panel and/or door fin-

isher to protect from damage.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

When installing rear door finisher, make sure the clips and metal clips are securely pressed into door

panel holes.

JMJIA6027ZZ

JMJIA6028ZZ

AWJIA0725ZZ