|
|
P2138 APP SENSOR EC-419 < DTC/CIRCUIT DIAGNOSIS > [HR16DE] C D E F G H I J K L M A EC N P O Is the inspection result normal? YES >> GO TO 3. NO >> Repair open circuit or short to ground or shot to power in harness or connectors. 3. CHECK APP SENSOR 2 POWER SUPPLY CIRCUIT-I Check the voltage between APP sensor harness connector and ground. Is the inspection result normal? YES >> GO TO 7. NO >> GO TO 4. 4. CHECK APP SENSOR 2 POWER SUPPLY CIRCUIT-II 1. Turn ignition switch OFF. 2. Disconnect ECM harness connector. 3. Check the continuity between APP sensor harness connector and ECM harness connector. Is the inspection result normal? YES >> GO TO 5. NO >> Repair open circuit or short to ground or shot to power in harness or connectors. 5. CHECK SENSOR POWER SUPPLY CIRCUIT Check harness for short to power and short to ground, between the following terminals. *: With A/C models YES >> GO TO 6. NO >> Repair short to ground or short to power in harness or connectors. 6. CHECK COMPONENTS Check the following. • EVAP control system pressure sensor (Refer to EC-307, "Component Inspection" ). • Battery current sensor (Refer to EC-368, "Component Inspection" ). • Crankshaft position sensor (POS) (Refer to EC-274, "Component Inspection" • Refrigerant pressure sensor (Refer to .) APP sensor Ground Voltage Connector Terminal E12 4 Ground Approx. 5 V APP sensor Ground Voltage Connector Terminal E12 5 Ground Approx. 5 V APP sensor ECM Continuity Connector Terminal Connector Terminal E12 5 E16 102 Existed ECM Sensor Connector Terminal Name Connector Terminal F11 71 EVAP control system pressure sen- B3 3 Battery current sensor F9 1 75 CKP sensor (POS) F15 1 E16 101 Refrigerant pressure sensor * E17 3 102 Accelerator pedal position sensor E12 5 |