|
|
P0102, P0103 MAF SENSOR EC-183 < DTC/CIRCUIT DIAGNOSIS > [HR16DE] C D E F G H I J K L M A EC N P O P0102, P0103 MAF SENSOR DTC Logic INFOID:0000000009267080 DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1. PRECONDITIONING If DTC Confirmation Procedure has been previously conducted, always perform the following procedure before conducting the next test. 1. Turn ignition switch OFF and wait at least 10 seconds. 2. Turn ignition switch ON. 3. Turn ignition switch OFF and wait at least 10 seconds. P0102 >> GO TO 2. P0103 >> GO TO 3. 2. PERFORM DTC CONFIRMATION PROCEDURE FOR DTC P0102 1. Start engine and wait at least 5 seconds. 2. Check DTC. YES >> Go to NO >> INSPECTION END 3. PERFORM DTC CONFIRMATION PROCEDURE FOR DTC P0103-I 1. Turn ignition switch ON and wait at least 5 seconds. 2. Check DTC. YES >> Go to NO >> GO TO 4. 4. PERFORM DTC CONFIRMATION PROCEDURE FOR DTC P0103-II 1. Start engine and wait at least 5 seconds. 2. Check DTC. YES >> Go to NO >> INSPECTION END Diagnosis Procedure INFOID:0000000009267081 1. INSPECTION START Confirm the detected DTC. P0102 >> GO TO 2. P0103 >> GO TO 3. 2. CHECK INTAKE SYSTEM DTC No. Trouble diagnosis name DTC detecting condition Possible cause P0102 Mass air flow sensor circuit An excessively low voltage from the sensor is • Harness or connectors (The sensor circuit is open or shorted.) • Intake air leakage P0103 Mass air flow sensor circuit An excessively high voltage from the sensor is • Harness or connectors (The sensor circuit is open or shorted.) • Mass air flow sensor |