|
|
CLUTCH PEDAL CL-5 < PERIODIC MAINTENANCE > C E F G H I J K L M A B CL N O P PERIODIC MAINTENANCE CLUTCH PEDAL Inspection and Adjustment INFOID:0000000009417552 1. Check to see if the master cylinder rod end ( ) moves freely. It should not be bound by the clutch pedal. a. If the master cylinder rod end ( ) does not move freely, remove the master cylinder rod end ( ) and check for deformation or damage on the master cylinder rod end ( ). Leave the master cylinder rod end ( ) removed. 2. Check the clutch pedal stroke for free range of movement. freely. b. If any sticking is noted, replace the clutch pedal assembly. Re-verify that the master cylinder rod end moves freely. 3. Adjust clutch interlock switch (1) position so that clearance between clutch pedal (2) and thread end of clutch interlock switch (1), with clutch pedal fully depressed, is within specifica- tion (C). 4. Check the clutch hydraulic system components (clutch master cylinder, clutch pedal and CSC (Concentric Slave Cylinder) for sticking or binding. a. If any sticking or binding is noted, repair or replace the related parts as necessary. PCIB1491E Clearance (C) : Refer to PCIB1493E |