|
|
EXL-326 < REMOVAL AND INSTALLATION > [HALOGEN TYPE] REAR COMBINATION LAMP REAR COMBINATION LAMP Exploded View INFOID:0000000009465397 Removal and Installation INFOID:0000000009465398 REAR COMBINATION LAMP Removal 1. Remove the trunk side finisher. Refer to 2. Remove the rear combination lamp nuts. Installation Installation is in the reverse order of removal. WARNING: Do not touch bulb with your hand while it is on or right after being turned off, a burn injury may result. CAUTION: • Do not touch bulb glass with your hand or keep other grease and oily substances away from bulb glass. • Do not leave bulb out of lamp reflector for a long time because dust, moisture smoke, etc. may affect the performance of lamp. When replacing bulb, be sure to replace it with new one. STOP/TAIL LAMP Replacement is integral with rear combination lamp. Refer to REAR SIDE MARKER LAMP BULB Removal 1. Remove the rear combination lamp. Refer to 2. Rotate the rear side marker lamp socket counterclockwise and unlock from rear combination lamp. Installation Installation is in the reverse order of removal. REAR TURN SIGNAL LAMP BULB 1. Slide clip 2. Grommets 3. Rear combination lamp ALLIA0902ZZ |