|
|
FRAME WIRE HBC-649 < REMOVAL AND INSTALLATION > D E F G H I J K L M A B HBC N O P 2. Remove the rear seat. Refer to SE-22, "Removal and Installation" . 3. Remove the fuel tank. Refer to FL-11, "Removal and Installation" . 4. Remove the 12 volt positive battery cable retaining clips from the trunk compartment. STC-60, "Removal and Installation" . 6. Remove the DC/DC converter harness retaining clip from the HV battery assembly. HBB-97, "Removal and Installation" 8. Disconnect the 12 volt terminal and cable retaining clip from the HV battery assembly. Refer to 9. Remove the frame wire harness retaining clips from the vehicle interior. EM-24, "Removal and Installation" . 11. Remove the inverter cover and terminal cover from the inverter. Refer to HBC-638, "Removal and Installa- 12. Remove the frame wire inverter connector bolt and disconnect the frame wire inverter connector from the inverter. Refer to HBC-638, "Removal and Installation" . 13. Remove the HV fuse box cover from the HV fuse box (1). fuse box (1). 15. Open the HV fuse box side cover (B) and remove the harness retaining clip (C) and HV fuse box terminals from the HV fuse box (1). 16. Disconnect the EPS ECU connectors (D). Refer to 17. Remove the EPS ECU harness retaining clips from the engine room. 18. Remove the EPS ECU bonding wire bolt. EM-71, "Removal and Installation" . 21. Remove the frame wire retainer nuts and bolts from the underside of vehicle. engine room. Installation Installation is in the reverse order of removal. FRAME WIRE (ELECTRIC COMPRESSOR) Removal 1. Remove the air cleaner and air duct. Refer to EM-24, "Removal and Installation" . 2. Remove the front terminal cover bolt from the inverter cover and disconnect the electric compressor inverter connector from the inverter. Refer to HBC-638, "Removal and Installation" 3. Disconnect the electric compressor connector from the electric compressor. Refer to 4. Remove the front engine mounting insulator and bracket bolts. Refer to 5. Remove the electric compressor frame wire harness clips and electric compressor frame wire harness from the vehicle. Installation Installation is in the reverse order of removal. ALCIA0081ZZ |