|
|
P0A0D-350, P0A0D-351 HBC-145 < COMPONENT DIAGNOSIS > D E F G H I J K L M A B HBC N O P >> GO TO 2. 2. CHECK DTC OUTPUT (HYBRID SYSTEM) 1. Turn ignition switch ON. 2. Check DTC. YES >> Go to inspection procedure relevant to output DTC. NO >> GO TO 3. 3. CLEAR DTC (HYBRID SYSTEM) 1. Turn ignition switch ON. 2. Read and record the DTC and freeze frame data. 3. Clear the DTC. >> GO TO 4. 4. CHECK HARNESS AND CONNECTOR (INVERTER WITH CONVERTER ASSEMBLY) CAUTION: Be sure to wear insulated gloves. 1. Turn ignition switch OFF and remove the service plug grip (See HBC-632, "Precautions for Inspecting the 2. Check if the inverter with converter assembly is installed correctly. YES >> GO TO 5. NO >> Connect securely. 5. RECONFIRM DTC OUTPUT (HYBRID SYSTEM) 1. Turn ignition switch ON. 2. Recheck DTC. YES >> GO TO 6. NO >> GO TO 15. 6. CHECK SERVICE PLUG GRIP CAUTION: Be sure to wear insulated gloves. 1. Check if the service plug grip is installed correctly. NOTE: For the removal and installation procedures, (See HBC-632, "Precautions for Inspecting the Hybrid Con- ). The service plug grip is installed correctly. YES >> GO TO 7. NO >> Connect securely. 7. CHECK INVERTER WITH CONVERTER ASSEMBLY (COMPRESSOR FUSE COVER INSTALLATION CONDITION) CAUTION: Be sure to wear insulated gloves. 1. Turn ignition switch OFF and remove the service plug grip (See |