|
|
TRUNK ROOM LAMP SWITCH DLK-93 < COMPONENT DIAGNOSIS > C D E F G H I J L M A B DLK N O P Is the inspection result normal? YES >> GO TO 3 NO >> Repair or replace harness between BCM and trunk lamp switch and trunk release solenoid. 3. CHECK TRUNK LAMP SWITCH GROUND CIRCUIT Check continuity between trunk lid lock assembly connector and ground. Is the inspection result normal? YES >> GO TO 4 NO >> Repair or replace trunk lamp switch and trunk release solenoid ground circuit. 4. CHECK BCM OUTPUT SIGNAL 1. Insure trunk remains closed during this step. 2. Connect BCM connector. 3. Check voltage between BCM connector and ground. Is the inspection result normal? YES >> GO TO 5 NO >> Replace BCM. Refer to BCS-87, "Removal and Installation" 5. CHECK TRUNK ROOM LAMP SWITCH DLK-93, "Component Inspection" Is the inspection result normal? YES >> GO TO 6 NO >> Replace trunk lamp switch and trunk release solenoid. 6. CHECK INTERMITTENT INCIDENT GI-42, "Intermittent Incident" . >> Inspection End. Component Inspection INFOID:0000000004215701 1. CHECK TRUNK LAMP SWITCH 1. Turn ignition switch OFF. BCM connector Terminal Ground Continuity A: M21 130 No Trunk lamp switch and trunk release solenoid connector Terminal Ground Continuity B28 2 Yes ALKIA1050ZZ Terminals Voltage (V) (Approx.) (+) (–) BCM connector Terminal M21 130 Ground ALKIA0370ZZ JPMIA0011GB |