|
|
BRC-172 < DTC/CIRCUIT DIAGNOSIS > [TYPE 2] C1116 STOP LAMP SWITCH 2. Check the continuity between the ABS actuator and electric unit (control unit) connector E127 terminal 39 and stop lamp switch connector E39 terminal 2. Is the inspection result normal? YES >> Refer to NO >> Repair or replace malfunctioning components. Special Repair Requirement INFOID:0000000009479456 1. ADJUSTMENT OF STEERING ANGLE SENSOR NEUTRAL POSITION Always perform neutral position adjustment for the steering angle sensor when replacing the ABS actuator and electric unit (control unit). Refer to BRC-124, "ADJUSTMENT OF STEERING ANGLE SENSOR NEU- >> GO TO 2 2. CALIBRATION OF DECEL G SENSOR Always perform calibration of decel G sensor when replacing the ABS actuator and electric unit (control unit). BRC-125, "CALIBRATION OF DECEL G SENSOR : Description" . >> END Continuity should exist. |