|
|
WARNING Do not use the cruise control when driv- ∙ When it is not possible to keep the vehicle at a set speed. ∙ In heavy traffic or in traffic that varies in speed. ∙ On winding or hilly roads. ∙ On slippery roads (rain, snow, ice, etc.). ∙ In very windy areas. Doing so could cause a loss of vehicle CRUISE CONTROL OPERATIONS The cruise control allows driving at a speed To turn on the cruise control, push the indicator in the instrument panel comes on. To set cruising speed, accelerate the ve- indicator in the instrument panel comes on. Take your foot off the ac- ∙ To pass another vehicle, depress the accelerator pedal. When you release the ∙ The vehicle may not maintain the set speed when going up or down steep To cancel the preset speed, use one of the ∙ Push the CANCEL switch; the CRUISE indicator light or indicator in the instrument panel goes out. ∙ Tap the brake pedal; the CRUISE indica- tor light or indicator goes out. ∙ Push the CRUISE ON/OFF switch. The CRUISE indicator light or indicator in the instrument panel goes out. The cruise control is automatically can- indicator in the instrument panel goes out if: ∙ You depress the brake pedal while pushing the RES+ or SET– switch. The ∙ The vehicle slows down more than 8 mph (13 km/h) below the set speed. ∙ You move the shift lever to N (Neutral). To reset at a faster cruising speed, use ∙ Depress the accelerator pedal. When the vehicle attains the desired speed, ∙ Push and hold the RES+ switch. When the vehicle attains the speed you desire, ∙ Push and release the RES+ switch. Each time you do this, the set speed in- 5-40 Starting and driving |