|
|
CHARGE PORT LID OPENER RELAY DLK-115 < DTC/CIRCUIT DIAGNOSIS > C D E F G H I J L M A B DLK N O P CHARGE PORT LID OPENER RELAY Diagnosis Procedure INFOID:0000000010119800 Regarding Wiring Diagram information, refer to . 1. CHECK CHARGE PORT LID OPENER ACTUATOR RELAY POWER SUPPLY-1 1. Turn power switch OFF. 2. Disconnect charge port lid opener actuator relay. 3. Check the voltage between charge port lid opener actuator relay harness connector and ground. Is the inspection result normal? YES >> GO TO 5. NO >> GO TO 2. 2. CHECK CHARGE PORT LID OPENER ACTUATOR RELAY POWER SUPPLY-2 Check the voltage between IPDM E/R harness connector and ground. Is the inspection result normal? YES >> GO TO 4. NO >> GO TO 3. 3. CHECK FUSE 1. Remove 20A fuse #43 from IPDM E/R. 2. Check that the fuse is not blown. YES >> Replace IPDM E/R. Refer to PCS-29, "Removal and Installation" . NO >> Replace the fuse after repairing the applicable circuit. 4. CHECK CHARGE PORT LID OPENER ACTUATOR RELAY POWER SUPPLY CIRCUIT 1. Disconnect IPDM E/R harness connector. 2. Check the continuity between IPDM E/R harness connector and charge port lid opener actuator relay har- ness connector. 3. Also check harness for short to ground and short to voltage. YES >> Check intermittent incident. Refer to GI-53, "Intermittent Incident" . NO >> Repair or replace malfunctioning component. + − Voltage (Approx.) Charge port lid opener actuator relay Connector Terminal E88 5 Ground 12V battery voltage + − Voltage (Approx.) IPDM E/R Connector Terminal E14 42 Ground 12V battery voltage + − Continuity IPDM E/R Charge port lid opener actuator relay Connector Terminal Connector Terminal E14 42 E88 5 Yes |