|
|
BCS-26 < SYSTEM DESCRIPTION > DIAGNOSIS SYSTEM (BCM) WORK SUPPORT RETAINED POWER INFOID:0000000010122323 DATA MONITOR SIGNAL BUFFER INFOID:0000000010122324 DATA MONITOR AIR PRESSURE MONITOR INFOID:0000000010122325 NOTE: The Signal Tech II Tool (J-50190) can be used to perform the following functions. Refer to the Signal Tech II User Guide for additional information. • Activate and display TPMS transmitter IDs • Display tire pressure reported by the TPMS transmitter • Read TPMS DTCs • Register TPMS transmitter IDs • Check Intelligent Key relative signal strength • Confirm vehicle Intelligent Key antenna signal strength SELF DIAGNOSTIC RESULT NOTE: Before performing Self Diagnostic Result, be sure to register the transmitter ID or the actual malfunction may be different from that displayed on CONSULT. DATA MONITOR Test Item Description VEHICLE SECURITY HORN This test is able to check vehicle security horn operation [On]. FLASHER This test is able to check turn signal lamp operation [RH/LH/Off]. THEFT IND This test is able to check security indicator lamp operation [Off/On]. HEADLAMP(HI) This test is able to check vehicle security lamp operation [On]. Support Item Setting Description THEFT ALM TRG Off/On The switch that triggered vehicle security alarm is recorded [On]. CLEAR Trigger data can be erased. SECURITY ALARM SET On Security alarm ON. Off Security alarm OFF. Monitor Item [Unit] Description DOOR SW-DR [On/Off] Indicates condition of front door switch LH. DOOR SW-AS [On/Off] Indicates condition of front door switch RH. Monitor Item [Unit] Description PUSH SW [On/Off] Indicates condition of the power switch. |