|
|
Content .. 1060 1061 1062 1063 ..
SEC-10 < SYSTEM DESCRIPTION > [WITH INTELLIGENT KEY SYSTEM] COMPONENT PARTS 5. Inside key antenna (Instrument Inside key antenna (Instrument center) detects whether Intelligent Key is inside the vehicle DLK-17, "Inside Key Antenna (Instrument Center)" for detailed installation location. 6. VCM • VCM controls the vehicle. When power switch is turned to the ON position, BCM starts communication with VCM and performs the ID verification between BCM and VCM. • VCM detects the shift position, and then transmits the P position signal to BCM and IPDM E/R. And VCM transmits the P/N position signal to BCM. • BCM confirms the shift position with the following 4 signals. EVC-15, "Component Parts Location" for detailed installation location. 7. Stop lamp switch Stop lamp switch detects that brake pedal is depressed, and then transmits the signal to BRC-10, "Component Parts Location" for detailed installation location. 8. ABS actuator and electric unit ABS actuator and electric unit (control unit) transmits the vehicle speed signal to BCM via BRC-10, "Component Parts Location" for detailed installation location. 9. IPDM E/R IPDM E/R has headlamp relays inside. Headlamp relays are used for the vehicle security PCS-6, "Component Parts Location" for detailed installation location. 10. Combination meter Combination meter transmits the vehicle speed signal to BCM via CAN communication. MWI-6, "METER SYSTEM : Component Parts Location" for detailed installation lo- cation. 11. Door lock and unlock switch Door lock and unlock switch is integrated into the main power window and lock/unlock switch DLK-19, "Door Lock and Unlock Switch" for detailed installation location. 12. Front outside handle LH Outside key antenna and door request switch are integrated into the front outside handle LH. then transmits signal to BCM. • Front door request switch transmits door lock/unlock request signal to BCM. DLK-19, "Front Door Request Switch (LH)" for detailed installation location. 13. Door key cylinder switch Door key cylinder switch is integrated into front door lock assembly (LH). DLK-15, "Component Parts Location" for detailed installation location. 14. Front door switch (LH) Door switch detects door open/close condition, and then transmits ON/OFF signal to BCM. for detailed installation location. 15. Rear door switch LH Door switch detects door open/close condition, and then transmits ON/OFF signal to BCM. for detailed installation location. 16. Back door opener switch as- Back door opener switch and back door request switch are integrated into back door switch DLK-20, "Back Door Opener Switch" and DLK-20, "Back Door Request Switch" for detailed installation location. No. Component Function |