|
|
REAR SHOCK ABSORBER RSU-11 < REMOVAL AND INSTALLATION > C D F G H I J K L M A B RSU N O P 5. Remove the rear shock absorber nuts ( ). 6. Remove the rear shock absorber. INSTALLATION Installation is in the reverse order of removal. • Perform the final tightening of the parts under unladen conditions with the tires on the ground. Disposal INFOID:0000000009177397 1. Set the shock absorber horizontally with the piston rod fully extended. shown to release gas gradually. CAUTION: • Wear eye protection (safety glasses). • Wear gloves. • Be careful with metal chips or oil blown out by the com- pressed gas. NOTE: ) directly into the outer tube avoiding brackets. • The gas is clear, colorless, odorless, and harmless. 3. Position the drilled hole downward and drain the oil by moving the piston rod several times. CAUTION: Dispose of drained oil according to the law and local regulations. JPEIB0060ZZ (A) : 20 – 30 mm (0.79 – 1.18 in) JPEIA0161ZZ |