Nissan Pathfinder. Instruction - part 941

PWC-60

< SYMPTOM DIAGNOSIS >

[LH FRONT ONLY AUTO DOWN]

POWER WINDOW LOCK SWITCH DOES NOT FUNCTION

POWER WINDOW LOCK SWITCH DOES NOT FUNCTION

Diagnosis Procedure

INFOID:0000000009176166

1.

REPLACE POWER WINDOW MAIN SWITCH

Replace power window main switch. Refer to 

PWC-62, "Removal and Installation"

.

>> Inspection End. 

POWER WINDOW SWITCH DOES NOT ILLUMINATE

PWC-61

< SYMPTOM DIAGNOSIS >

[LH FRONT ONLY AUTO DOWN]

C

D

E

F

G

H

I

J

L

M

A

B

PWC

N

O

P

POWER WINDOW SWITCH DOES NOT ILLUMINATE

DRIVER SIDE
DRIVER SIDE : Diagnosis Procedure

INFOID:0000000009176167

1.

REPLACE POWER WINDOW MAIN SWITCH

Replace power window main switch.

Refer to 

PWC-62, "Removal and Installation"

.

>> Inspection End. 

PASSENGER SIDE
PASSENGER SIDE : Diagnosis Procedure

INFOID:0000000009176168

1.

REPLACE POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH

Replace power window and door lock/unlock switch RH.

Refer to 

PWC-62, "Removal and Installation"

.

>> Inspection End. 

REAR LH
REAR LH : Diagnosis Procedure

INFOID:0000000009176169

1.

REPLACE REAR POWER WINDOW SWITCH LH

Replace rear power window switch LH.

Refer to 

PWC-62, "Removal and Installation"

.

>> Inspection End.

REAR RH
REAR RH : Diagnosis Procedure

INFOID:0000000009176170

1.

REPLACE REAR POWER WINDOW SWITCH RH

Replace rear power window switch RH.

Refer to 

PWC-62, "Removal and Installation"

.

>> Inspection End. 

PWC-62

< REMOVAL AND INSTALLATION >

[LH FRONT ONLY AUTO DOWN]

MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH

REMOVAL AND INSTALLATION

MAIN POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH

Removal and Installation

INFOID:0000000009176171

REMOVAL

1. Remove the main power window and door lock/unlock switch from the front door finisher using a suitable

tool. 

2. Disconnect the harness connectors (A) from the main power

window and door lock/unlock switch (1) and harness connector

(B) from the mirror control switch (2). 

3. Release the pawls, then separate the main power window and

door lock/unlock switch (1) from the switch finisher (2).

: Pawl

INSTALLATION

Installation is in the reverse order of removal.

NOTE:

When the main power window and door lock/unlock switch is removed or replaced, it is necessary to perform

the initialization procedure. Refer to 

PWC-26, "Work Flow"

.

ALKIA2855ZZ

ALKIA2856ZZ

POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH

PWC-63

< REMOVAL AND INSTALLATION >

[LH FRONT ONLY AUTO DOWN]

C

D

E

F

G

H

I

J

L

M

A

B

PWC

N

O

P

POWER WINDOW AND DOOR LOCK/UNLOCK SWITCH RH

Removal and Installation

INFOID:0000000009176172

REMOVAL

1. Remove the power window and door lock/unlock switch (RH) from the front door finisher using a suitable

tool. 

2. Disconnect the harness connector (A) from the power window

and door lock/unlock switch (RH) (1).

3. Release four pawls, then separate power window and door lock/

unlock switch (RH) (1) from switch finisher (2).

: Pawl

INSTALLATION

Installation is in the reverse order of removal.

ALKIA2857ZZ

ALKIA2858ZZ