Nissan Pathfinder. Instruction - part 641

FL-20

< REMOVAL AND INSTALLATION >

EVAP CANISTER FILTER

EVAP CANISTER FILTER

Exploded View

INFOID:0000000009178408

Removal and Installation

INFOID:0000000009178409

REMOVAL

1. Disconnect EVAP canister vent control valve hose from EVAP canister filter. 
2. Disconnect canister drain hose from EVAP canister filter.
3. Remove the bolt and the EVAP canister filter.

INSTALLATION

Installation is in the reverse order of removal.

ALBIA0792ZZ

1.

EVAP canister vent control valve hose

2.

Canister drain hose

3.

EVAP canister filter

4.

EVAP canister filter bracket

Front

EVAP CANISTER VENT CONTROL VALVE

FL-21

< REMOVAL AND INSTALLATION >

C

D

E

F

G

H

I

J

K

L

M

A

FL

N

P

O

EVAP CANISTER VENT CONTROL VALVE

Exploded View

INFOID:0000000009178410

Removal and Installation

INFOID:0000000009178411

NOTE:

The EVAP canister vent control valve can be removed without removing the EVAP canister.

REMOVAL

1. Disconnect EVAP canister vent control valve hose from EVAP canister vent control valve. 
2. Disconnect EVAP canister vent control valve harness connector.
3. Turn EVAP canister vent control valve counterclockwise.

4. Remove the EVAP canister vent control valve and O-ring.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

Do not reuse O-ring.

1.

EVAP canister

2.

O-ring

3.

EVAP canister vent control valve

4.

EVAP canister vent control valve hose

ALBIA0793ZZ

(A)

: Lock

(B)

: Unlock

ALBIA0794ZZ

FL-22

< REMOVAL AND INSTALLATION >

EVAP CONTROL SYSTEM PRESSURE SENSOR

EVAP CONTROL SYSTEM PRESSURE SENSOR

Exploded View

INFOID:0000000009178412

Removal and Installation

INFOID:0000000009178413

NOTE:

The EVAP canister system pressure sensor can be removed without removing the EVAP canister.

REMOVAL

1. Disconnect EVAP canister purge hose from EVAP canister. 
2. Disconnect EVAP control system pressure sensor harness connector.
3. Remove EVAP control system pressure sensor and O-ring.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

Do not reuse O-ring.

1.

EVAP control system pressure sensor 2.

O-ring

3.

EVAP canister

ALBIA0753ZZ

FUEL LEVEL SENSOR UNIT

FL-23

< DISASSEMBLY AND ASSEMBLY >

C

D

E

F

G

H

I

J

K

L

M

A

FL

N

P

O

DISASSEMBLY AND ASSEMBLY

FUEL LEVEL SENSOR UNIT

Disassembly and Assembly

INFOID:0000000009178414

Fuel Level Sender Unit

Disassembly

NOTE:

Before disassembly, note the proper placement of the wires to the correct terminals and correct wire routing to

the terminals.
1. Disconnect the fuel level sensor unit harness connector (A) and

the fuel tank temperature sensor harness connector (C). Press

the tabs on the terminals to release the locking tabs.

ALBIA0795ZZ

1.

Fuel level sensor unit

2.

Fuel tank temperature sensor

A.

Fuel level sensor unit harness connector

B.

Fuel pump harness connector

C.

Fuel tank temperature sensor harness 
connector

D.

Float arm assembly

(B)

: Fuel pump harness connector

ALBIA0796ZZ