Nissan Pathfinder. Instruction - part 613
EXL-140
< PERIODIC MAINTENANCE >
FRONT FOG LAMP AIMING ADJUSTMENT
FRONT FOG LAMP AIMING ADJUSTMENT
Aiming Adjustment
INFOID:0000000009175402
NOTE:
Check the following conditions before performing the aiming adjustment.
• Keep all tires inflated to correct pressure.
• Place vehicle on level ground.
• See that vehicle is unloaded (except for full levels of coolant, engine oil and fuel, and spare tire, jack, and
tools). Have the driver or equivalent weight placed in driver seat.
• When performing adjustment, if necessary, cover the headlamps and opposite fog lamp.
1. Set the distance between the screen and the center of the fog
lamp lens as shown.
(1) Aiming screen or a matte white surface
(2) 7.62 m (25 ft)
(3) Floor to center of fog lamp lens
(4) Floor
2. Turn front fog lamps ON.
3. Access adjustment screw from underneath front bumper. Use a
suitable tool to adjust. Turn screw clockwise to raise pattern and
counterclockwise to lower pattern. Adjust front fog lamps using
adjusting screw so that the top edge of the high intensity zone is
100 mm (4 in) below the height of the fog lamp centers as
shown.
(1) Vertical center line of left fog lamp.
(2) Lamp center above ground.
(3) 100 mm (4 in) (0.76 deg) below lamp center above ground.
(4) Left fog lamp high intensity area.
(5) Vehicle center axis.
(6) Vertical center line of right fog lamp.
(7) Right fog lamp high intensity area.
ALLIA1058ZZ
LKIA0572E
AWLIA2199ZZ