|
|
EC-430 < DTC/CIRCUIT DIAGNOSIS > [VQ35DE] FUEL INJECTOR Is the inspection result normal? YES >> Perform the trouble diagnosis for power supply circuit. NO >> Repair or replace error-detected parts. 3. CHECK FUEL INJECTOR OUTPUT SIGNAL CIRCUIT FOR OPEN AND SHORT 1. Turn ignition switch OFF. 2. Disconnect ECM harness connector. 3. Check the continuity between fuel injector harness connector and ECM harness connector. 4. Also check harness for short to ground and short to power. YES >> GO TO 4. NO >> Repair open circuit, short to ground or short to power in harness or connectors. 4. CHECK FUEL INJECTOR Check fuel injector. Refer to EC-431, "Component Inspection" Is the inspection result normal? YES >> GO TO 5. NO >> Replace malfunctioning fuel injector. Refer to EM-47, "Removal and Installation" . 5. CHECK INTERMITTENT INCIDENT Check intermittent incident. Refer to GI-49, "Intermittent Incident" . Is the inspection result normal? YES >> Replace IPDM E/R. Refer to PCS-32, "Removal and Installation" NO >> Repair or replace error-detected parts. Component Inspection INFOID:0000000009178362 1. CHECK FUEL INJECTOR 1. Turn ignition switch OFF. 2. Disconnect fuel injector harness connector. Fuel injector IPDM E/R Continuity Cylinder Connector Terminal Connector Terminal 1 F30 1 F19 54 Existed 2 F18 1 60 3 F41 1 54 4 F20 1 60 5 F42 1 54 6 F22 1 60 Fuel injector ECM Continuity Cylinder Connector Terminal Connector Terminal 1 F30 2 F51 33 Existed 2 F18 2 44 3 F41 2 48 4 F20 2 47 5 F42 2 46 6 F22 2 45 |