Nissan Pathfinder. Instruction - part 378

DLK-278

< REMOVAL AND INSTALLATION >

HOOD

3. Adjust the hood assembly so the clearance measurements are within specifications.
4. Tighten the hood hinge nuts and bolts to specified torque.
5. Tighten the hood lock assembly bolts to specified torque.

HOOD HINGE
HOOD HINGE : Removal and Installation

INFOID:0000000009175864

REMOVAL

1. Remove hood assembly. Refer to 

DLK-275, "HOOD ASSEMBLY : Removal and Installation"

.

2. Remove front fender. Refer to 

DLK-281, "FRONT FENDER : Removal and Installation"

.

3. Remove hood hinge bolts, and then remove hood hinge.

INSTALLATION

Installation is in the reverse order of removal.

CAUTION:

• Before installing the hood hinge, apply anticorrosive agent onto the surface of the vehicle.

• After installation, perform hood assembly adjustment procedure. Refer to 

DLK-276, "HOOD ASSEM-

BLY : Adjustment"

.

RADIATOR CORE SUPPORT

DLK-279

< REMOVAL AND INSTALLATION >

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

RADIATOR CORE SUPPORT

Exploded View

INFOID:0000000009175865

Removal and Installation

INFOID:0000000009175866

CAUTION:

When removing radiator core support upper, be careful not to damage the painted surface.

REMOVAL

1. Remove front bumper fascia. Refer to 

EXT-17, "Removal and Installation"

.

2. Release clips and then remove radiator upper seal.
3. Remove the battery. Refer to 

PG-90, "Removal and Installation"

.

4. Disconnect harness connector from refrigerant pressure sensor.
5. Remove upper air intake.
6. Disconnect all harness clips from radiator core support assembly.
7. Remove hood lock assembly. Refer to 

DLK-299, "HOOD LOCK RELEASE CABLE : Removal and Instal-

lation"

.

1.

Radiator support (LH)

2.

Radiator support (RH)

3.

Radiator core support assembly

A. Refer to installation for sequence order

ALKIA2870ZZ

DLK-280

< REMOVAL AND INSTALLATION >

RADIATOR CORE SUPPORT

8. Release clips of air guide seal and remove.
9. Remove radiator bolts. Refer to 

CO-15, "Removal and Installation"

.

10. Remove bolts, and radiator core support assembly.

INSTALLATION

Installation is in the reverse order of removal. 

• When installing the radiator core support, tighten the core support bolts in the sequence shown.

ALKIA2871ZZ

FRONT FENDER

DLK-281

< REMOVAL AND INSTALLATION >

C

D

E

F

G

H

I

J

L

M

A

B

DLK

N

O

P

FRONT FENDER

Exploded View

INFOID:0000000009175867

FRONT FENDER
FRONT FENDER : Removal and Installation

INFOID:0000000009175868

CAUTION:

Use a shop cloths to protect the body from being damaged during removal and installation.

REMOVAL

1. Remove front fender protector. Refer to 

EXT-28, "FENDER PROTECTOR : Removal and Installation"

.

2. Remove front combination lamp. Refer to 

EXL-141, "Removal and Installation"

.

3. Remove front fender outside lower molding. Refer to 

EXT-38, "Removal and Installation"

.

4. Remove front fender bolts and front fender.

CAUTION:

1.

Front fender 

2.

Front fender upper seal

3.

Front fender hoodledge finisher

4.

Front fender bracket

5.

Front fender lower bracket

A.

Clip

B.

Bolt

AWKIA2622ZZ