|
|
DLK-58 < ECU DIAGNOSIS INFORMATION > AUTOMATIC BACK DOOR CONTROL UNIT DTC Inspection Priority Chart INFOID:0000000009175634 If some DTCs are displayed at the same time, perform inspections one by one based on the following priority chart. DTC Index INFOID:0000000009175635 NOTE: Details of time display • 1 - 39: Displayed if any previous malfunction is present when current condition is normal. It increases 1 → 2 → 3...38 → 39 after returning to the normal condition whenever ignition switch OFF → ON. The counter remains at 39 even if the number of cycles exceeds it. It is counted from 1 again when turning ignition switch OFF → ON after returning to the normal condition if the malfunction is detected again. B2409 HALF LATCH SW Inhibit automatic back door operation Automatic back door control module B2416 TOUCH SEN R OPEN Inhibit automatic back door operation Return to normal status. B2417 TOUCH SEN L OPEN Inhibit automatic back door operation Return to normal status. B2419 OPEN SW Inhibit automatic back door operation Reconnect battery. B2420 CLOSE SW Inhibit automatic back door operation Reconnect battery. B2422 BACK DOOR STATE Inhibit automatic back door operation Half latch switch is ON from OFF. B2423 ABD MTR TIME OUT Inhibit automatic back door operation At least 180 seconds are passed af- B2426 SPINDLE SENSOR LH Inhibit automatic back door operation Return to normal status. B2427 SPINDLE SENSOR RH Inhibit automatic back door operation Return to normal status. B2428 AUTO BACK DR CNT MODULE Inhibit automatic back door operation Return to normal status. B242A CLSR CONDITION Inhibit automatic back door operation Reconnect battery. Display contents of CONSULT Fail-safe Cancellation Priority DTC 1 • B2428 AUTO BK DR CNT UNIT 2 • B2409 HALF LATCH SW CONSULT display Fail-safe Reference page U1000: CAN COMM × U1010: CONTROL UNIT(CAN) × B2401: IGN OPEN × B2409: HALF LATCH SW × B2416: TOUCH SEN R OPEN × B2417: TOUCH SEN L OPEN × |