|
|
BR-36 < REMOVAL AND INSTALLATION > FRONT DISC BRAKE • Do not deform the pad retainers. • Verify that the pad retainers are secured properly to the torque member. 2. Apply Rubber grease or equivalent to the mating faces between the brake pads and pad retainers. Refer BR-35, "BRAKE PAD : Exploded View" . 3. Apply Molykote AS-880N grease or equivalent to the mating faces between the brake pads, shims and shim covers, and install them to the brake pad. Refer to BR-35, "BRAKE PAD : Exploded View" CAUTION: When installing new brake pads, replace the shims and shim covers. 4. Install the brake pads to the torque member. CAUTION: Do not damage the piston boot. 6. Install the brake caliper to the torque member. BR-35, "BRAKE PAD : Exploded View" . 8. Depress the brake pedal several times and verify that drag does not exist. . 10. Check brake fluid level and refill as necessary. Refer to BRAKE CALIPER ASSEMBLY INFOID:0000000009177199 BRAKE CALIPER ASSEMBLY : Removal and Installation INFOID:0000000009177200 WARNING: Clean dust on brake caliper and brake pad with a vacuum dust collector to minimize the hazard of air- borne particles or other materials. 1. Brake caliper 2. Copper sealing washer 3. Brake hose 4. Torque member AWFIA0956ZZ |