|
|
содержание .. 2138 2139 2140 2141 ..
TM-518 < ECU DIAGNOSIS INFORMATION > [CVT: RE0F10G] TCM SHIFT IND SIGNAL When the selector lever is positioned in be- OFF Selector lever: “P” position P Selector lever: “R” position R Selector lever: “N” position N Selector lever: “D” position D Instruction mode: 1st 1st Instruction mode: 2nd 2nd Instruction mode: 3rd 3rd Instruction mode: 4th 4th Instruction mode: 5th 5th Instruction mode: 6th 6th Instruction mode: 7th 7th CVT LAMP Approx. 2 seconds after ignition switch ON On Other than the above Off SPORT MODE IND Always Off MANU MODE SIGNAL Driving with instruction mode On Other than the above Off DS RANGE SIGNAL Selector lever: “DS” position On Other than the above Off ECO MODE SIGNAL Always Off VDC ON When VDC malfunction signal is received On Other than the above Off TCS ON When TCS malfunction signal is received On Other than the above Off ABS FAIL SIGNAL When ABS malfunction signal is received On Other than the above Off ABS ON ABS is activated On Other than the above Off RANGE Selector lever: “P” and “N” positions N/P Selector lever: “R position R Selector lever: “D” position D Selector lever: “M” position M GEAR POS Instruction mode: 1st – 7th 1 to 7 G SEN SLOPE Flat road 0% Uphill gradient The value changes to the positive side along with uphill gradient. (Maximum 40.45%) Downhill gradient The value changes to the negative side along with downhill gradient. (Minimum − 40.45%) G SEN CALIBRATION When G sensor calibration is completed DONE When G sensor calibration is not completed YET N IDLE STATUS Always Off Monitor item Condition Value/Status (Approx.) |