Nissan X-Trail 32. Instruction - part 1859

VEHICLE SECURITY SYSTEM CANNOT BE SET

SEC-203

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

SEC

N

O

P

VEHICLE SECURITY SYSTEM CANNOT BE SET

INTELLIGENT KEY

INTELLIGENT KEY : Description

INFOID:0000000010922245

Armed phase is not activated when door is locked using Intelligent Key.
NOTE:
Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and check
each symptom.

CONDITION OF VEHICLE (OPERATING CONDITION)

Confirm that the setting of “SECURITY ALARM SET” is “ON” in “WORK SUPPORT” mode of “THEFT ALM”of
“BCM” using CONSULT.

INTELLIGENT KEY : Diagnosis Procedure

INFOID:0000000010922246

1.

CHECK INTELLIGENT KEY SYSTEM (REMOTE KEYLESS ENTRY FUNCTION)

Lock/unlock door with Intelligent Key.
Refer to 

DLK-47, "REMOTE KEYLESS ENTRY FUNCTION : System Description"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Check Intelligent Key system (remote keyless entry function). Refer to 

DLK-239, "Diagnosis Pro-

cedure"

.

2.

CHECK HOOD SWITCH

Check hood switch.
Refer to 

SEC-192, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Replace hood lock assembly. Refer to 

DLK-297, "HOOD LOCK : Removal and Installation"

.

3.

CONFIRM THE OPERATION

Confirm the operation again.

Is the result normal?

YES

>> INSPECTION END

NO

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

DOOR REQUEST SWITCH

DOOR REQUEST SWITCH : Description

INFOID:0000000010922247

Armed phase is not activated when door is locked using door request switch.
NOTE:
Check that vehicle is under the condition shown in “Conditions of vehicle” before starting diagnosis, and check
each symptom.

CONDITION OF VEHICLE (OPERATING CONDITION)

Confirm that the setting of “SECURITY ALARM SET” is “ON” in “WORK SUPPORT” mode of “THEFT ALM”of
“BCM” using CONSULT.

DOOR REQUEST SWITCH : Diagnosis Procedure

INFOID:0000000010922248

1.

CHECK INTELLIGENT KEY SYSTEM (DOOR LOCK FUNCTION)

Lock/unlock door with door request switch.
Refer to 

DLK-42, "DOOR LOCK FUNCTION : System Description"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Check Intelligent Key system (door lock function). Refer to 

DLK-237, "ALL DOOR REQUEST

SWITCHES : Diagnosis Procedure"

.

SEC-204

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

VEHICLE SECURITY SYSTEM CANNOT BE SET

2.

CHECK HOOD SWITCH

Check hood switch.
Refer to 

SEC-192, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Replace hood lock assembly. Refer to 

DLK-297, "HOOD LOCK : Removal and Installation"

.

3.

CONFIRM THE OPERATION

Confirm the operation again.
Is the result normal?

YES

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.

NO

>> GO TO 1.

VEHICLE SECURITY ALARM DOES NOT ACTIVATE

SEC-205

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

C

D

E

F

G

H

I

J

L

M

A

B

SEC

N

O

P

VEHICLE SECURITY ALARM DOES NOT ACTIVATE

Description

INFOID:0000000011009366

Alarm does not operate when alarm operating condition is satisfied.

Diagnosis Procedure

INFOID:0000000011009367

1.

CHECK SENSOR CANCEL SWITCH

Check sensor cancel switch.
Refer to 

SEC-196, "Diagnosis Procedure"

.

Is the inspection result normal?

YES

>> GO TO 2.

NO

>> Replace sensor cancel switch.

2.

PERFORM SELF-DIAGNOSIS OF SIREN CONTROL UNIT

Perform self-diagnosis of siren control unit.
Refer to 

SEC-64, "Diagnosis Description"

.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace malfunctioning parts.

3.

CHECK DOOR SWITCH

Check door switch.
Refer to 

DLK-186, "Component Function Check"

 (TYPE 1) or 

DLK-495, "Component Function Check"

(TYPE 2).

Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Replace the malfunctioning door switch. Refer to 

DLK-319, "Removal and Installation"

 (TYPE 1)

or 

DLK-626, "Removal and Installation"

 (TYPE 2).

4.

CHECK HOOD SWITCH

Check hood switch.
Refer to 

SEC-192, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Replace hood lock assembly. Refer to 

DLK-297, "HOOD LOCK : Removal and Installation"

 (TYPE

1) or 

DLK-605, "HOOD LOCK : Removal and Installation"

 (TYPE 2).

5.

CHECK INTRUDER SENSOR

Check intruder sensor.
Refer to 

SEC-194, "Component Function Check"

.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Replace intruder sensor.

6.

REPLACE SIREN CONTROL UNIT

1.

Replace siren control unit.

2.

Confirm the operation after replacement.

Is the inspection result normal?

YES

>> INSPECTION END

NO

>> GO TO 7.

7.

REPLACE BCM

Replace BCM. Refer to 

BCS-121, "Removal and Installation"

Is the inspection result normal?

YES

>> INSPECTION END

SEC-206

< SYMPTOM DIAGNOSIS >

[WITH INTELLIGENT KEY SYSTEM]

VEHICLE SECURITY ALARM DOES NOT ACTIVATE

NO

>> Check intermittent incident. Refer to 

GI-44, "Intermittent Incident"

.