Nissan X-Trail 32. Instruction - part 1000

 

  Главная      Nissan     Nissan X-Trail 32 - Instruction

 

поиск по сайту           правообладателям

 

 

 

 

 

 

 

 

 

содержание   ..  998  999  1000  1001   ..

 

 

Nissan X-Trail 32. Instruction - part 1000

 

 

P148C EXHAUST ELECTRIC THROTTLE CONTROL ACTUATOR

EC-1129

< DTC/CIRCUIT DIAGNOSIS >

[R9M]

C

D

E

F

G

H

I

J

K

L

M

A

EC

N

P

O

P148C EXHAUST ELECTRIC THROTTLE CONTROL ACTUATOR

DTC Description

INFOID:0000000010935823

DTC DETECTION LOGIC

POSSIBLE CAUSE

• Exhaust throttle valve stuck
• Exhaust electric throttle control actuator

FAIL-SAFE

Not applicable

DTC CONFIRMATION PROCEDURE

1.

CHECK DTC PRIORITY

If DTC P148C is displayed with DTC P1481 or P1482, first perform the trouble diagnosis for DTC P1481 or
P1482.
Is applicable DTC detected?

YES

>> Perform diagnosis of applicable. Refer to 

EC-908, "DTC Index"

.

NO

>> GO TO 2.

2.

PRECONDITIONING

If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at
least 1 minute before conducting the next test.

>> GO TO 3.

3.

PERFORM DTC CONFIRMATION PROCEDURE

1.

Turn ignition switch ON and wait at least 3 seconds.

2.

Check DTC.

Is DTC detected?

YES

>> Proceed to 

EC-1129, "Diagnosis Procedure"

.

NO-1

>> To check malfunction symptom before repair: Refer to 

GI-44, "Intermittent Incident"

.

NO-2

>> Confirmation after repair: INSPECTION END

Diagnosis Procedure

INFOID:0000000010935824

1.

CHECK DTC PRIORITY

If DTC P148C is displayed with DTC P1481 or P1482, first perform the trouble diagnosis for DTC P1481 or
P1482.

Is applicable DTC detected?

YES

>> Perform diagnosis of applicable. Refer to 

EC-908, "DTC Index"

.

NO

>> GO TO 2.

2.

CHECK ECM HARNESS CONNECTOR CONNECTIONS

1.

Turn ignition switch OFF.

2.

Check ECM harness connector connection.

Is the inspection result normal?

YES

>> GO TO 3.

NO

>> Repair or replace error-detected parts.

DTC No.

CONSULT screen terms

(Trouble diagnosis content)

DTC detecting condition

P148C

EXHAUST AIR FLAP FUNCTION
(Exhaust air flap function)
• 1.DEF: NO RESPONSE FROM THE 

VALVE MOTOR

• Exhaust throttle valve regulation error.
• ECM detects an incorrect position of the exhaust throttle valve.

EC-1130

< DTC/CIRCUIT DIAGNOSIS >

[R9M]

P148C EXHAUST ELECTRIC THROTTLE CONTROL ACTUATOR

3.

CHECK EXHAUST ELECTRIC THROTTLE CONTROL ACTUATOR HARNESS CONNECTOR CONNEC-

TIONS

Check exhaust electric throttle control actuator harness connector connection.
Is the inspection result normal?

YES

>> GO TO 4.

NO

>> Repair or replace error-detected parts.

4.

CHECK EXHAUST ELECTRIC THROTTLE CONTROL ACTUATOR POWER SUPPLY CIRCUIT

Check the power supply of the exhaust electric throttle control actuator.

Is the inspection result normal?

YES

>> GO TO 5.

NO

>> Perform trouble diagnosis for power supply circuit.

5.

CHECK EXHAUST ELECTRIC THROTTLE CONTROL ACTUATOR CIRCUIT FOR OPEN AND SHORT

1.

Turn ignition switch OFF.

2.

Check exhaust electric throttle control actuator circuit for open and short.

Is the inspection result normal?

YES

>> GO TO 6.

NO

>> Repair or replace error-detected parts.

6.

DTC CONFIRMATION PROCEDURES

1.

Erase DTC.

2.

Perform DTC confirmation procedure again. Refer to 

EC-1129, "DTC Description"

.

Is the DTC P148C displayed again?

YES

>> GO TO 7.

NO

>> INSPECTION END

7.

CHECK EXHAUST ELECTRIC THROTTLE CONTROL ACTUATOR

Perform 

EC-1131, "Component Inspection (Exhaust Throttle Position Sensor)"

EC-1131, "Component Inspec-

tion (Exhaust Throttle Control Motor)"

.

Is the inspection result normal?

YES

>> INSPECTION END

NO

>> GO TO 8.

8.

REPLACE EXHAUST ELECTRIC THROTTLE CONTROL ACTUATOR

1.

Replace exhaust electric throttle control actuator.

2.

Perform 

EC-949, "Work Procedure"

.

+

-

Voltage

Exhaust electric throttle control ac-

tuator

Connector

Terminal

F154

5

Ground

Battery voltage

+

+

Continuity

ECM

Exhaust electric throttle 

control actuator

Connector

Terminal

Connector

Terminal

F118

104

F154

1

Existed

113

3

117

2

132

5

147

6

P148C EXHAUST ELECTRIC THROTTLE CONTROL ACTUATOR

EC-1131

< DTC/CIRCUIT DIAGNOSIS >

[R9M]

C

D

E

F

G

H

I

J

K

L

M

A

EC

N

P

O

>> INSPECTION END

Component Inspection (Exhaust Throttle Control Motor)

INFOID:0000000010935825

1.

CHECK EXHAUST THROTTLE CONTROL MOTOR

1.

Disconnect exhaust electric throttle control actuator harness connector.

2.

Check the resistance between exhaust throttle control motor terminals as follows.

Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Replace exhaust electric throttle control actuator.

Component Inspection (Exhaust Throttle Position Sensor)

INFOID:0000000010935826

1.

CHECK EXHAUST THROTTLE POSITION SENSOR

1.

Turn ignition switch ON.

2.

Check the voltage between ECM terminals as follows.

Is the inspection result normal?

YES

>> INSPECTION END

NO

>> Replace exhaust electric throttle control actuator.

Exhaust electric throttle control actua-

tor

Resistance

+

-

Terminal

5

6

2.65 - 3.25 

ECM

Voltage

+

-

Terminal

113

117

0.2 – 4.8 V

EC-1132

< DTC/CIRCUIT DIAGNOSIS >

[R9M]

P1512 STARTER MOTOR

P1512 STARTER MOTOR

Description

INFOID:0000000010935829

ECM multiplies operation counter of starter motor which operated in operation with key switch and operation
with restart and memorizes it.

DTC Description

INFOID:0000000010935830

DTC DETECTION LOGIC

POSSIBLE CAUSE

Starter motor

FAIL-SAFE

STOP/START SYSTEM

DTC CONFIRMATION PROCEDURE

1.

PRECONDITIONING

If the other DTC Confirmation Procedure is performed right before this procedure, the ignition switch must be
turned OFF and wait for 10 seconds or more to start this procedure.

>> GO TO 2.

2.

PERFORM DTC CONFIRMATION PROCEDURE

1.

Turn ignition switch ON and wait at least 3 seconds.

2.

Check DTC.

Is DTC detected?

YES

>> Proceed to 

EC-1132, "Diagnosis Procedure"

.

NO-1

>> To check malfunction symptom before repair: Refer to 

GI-44, "Intermittent Incident"

.

NO-2

>> Confirmation after repair: INSPECTION END

Diagnosis Procedure

INFOID:0000000010935831

1.

REPLACE STARTER MOTOR

Replace starter motor. Refer to 

STR-39, "R9M : Removal and Installation"

.

>> INSPECTION END

DTC No.

CONSULT screen terms

(Trouble diagnosis content)

DTC detecting condition

P1512

STARTER
(Starter)
• 1.DEF: NO OPERATION
• 2.DEF: INCORRECT OPERATION

When starter motor operating counter which ECM memorized is 250,000 
times or more.

Stop/start system operating condition in fail safe mode

Idling or driving the vehicle

Stop/start system operating

Stop

During cranking

(Restart)

Prohibit the stop/start system operation

Prohibit the stop/start system operation 
from the next time

 

 

 

 

 

 

 

содержание   ..  998  999  1000  1001   ..