|
|
PB-6 < PRECAUTION > PRECAUTIONS CAUTION: While waiting, never operate the vehicle such as locking, opening, and closing doors. Violation of 6. Remove 12V battery terminal. CAUTION: After installing 12V battery, always check self-diagnosis results of all ECUs and erase DTC. Precaution for Parking Brake System INFOID:0000000010318112 WARNING: Since dust covering the parking brake shoes and back plates has an affect on human body, the dust CAUTION: When vehicle is parked, press the select lever P range position switch into the P range. • When parking brake switch is pulled/pushed under electric parking brake system malfunction, master warn- ing lamp (red) turns ON when electric parking brake cannot be operated. • When a malfunction occurs that prevents the parking brake from being released and the parking brake must be released, instructionly release it. PB-10, "Parking Brake Actuator" . • When parking brake must be released while the 12V battery negative terminal is disconnected, instructionly PB-10, "Parking Brake Actuator" . • When parking brake shoe is ground or replaced, perform break-in operation. Refer to Precaution for Harness Repair INFOID:0000000010318113 • Solder the repair part, and wrap it with tape. [Twisted wire fray must be 110 mm (4.33 in) or less.] • Never bypass the repair point with wire. (If it is bypassed, the turn- out point cannot be separated and the twisted wire characteristics SKIB8766E SKIB8767E |