|
|
DLN-168 < UNIT DISASSEMBLY AND ASSEMBLY > [TRANSFER: TY30A] DRIVE PINION 2. Remove ring gear shaft assembly from transfer case. Then CAUTION: Apply red lead to both faces of 3 to 4 gears at 4 locations 3. Assemble the ring gear shaft assembly to the transfer case. 4. Install adapter case. Refer to 5. Remove plug on the lower side of the transfer case. 6. Rotate the companion flange back and forth several times. Then Tooth Contact Judgment Guide JSDIA0255ZZ SDIA3067J JSDIA0213GB |