|
|
DLN-116 < DTC/CIRCUIT DIAGNOSIS > [TRANSFER: TY30A] C1209 MODE SW C1209 MODE SW Description INFOID:0000000010288281 Able to select 2WD, AUTO or LOCK mode. DTC Logic INFOID:0000000010288282 DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1. DTC REPRODUCTION PROCEDURE With CONSULT 1. Turn the ignition switch OFF to ON. 2. Perform AWD control unit self-diagnosis. Is DTC “C1209” detected? YES >> Proceed to diagnosis procedure. Refer to DLN-116, "Diagnosis Procedure" . NO >> INSPECTION END Diagnosis Procedure INFOID:0000000010288283 1. CHECK AWD MODE SWITCH 1. Turn the ignition switch OFF. 2. Remove AWD mode switch. 3. Check the continuity between AWD mode switch connector terminals. *1: For RUSSIA *2: Except for RUSSIA Is the inspection result normal? YES >> GO TO 2. NO >> Replace AWD mode switch. 2. CHECK AWD MODE SWITCH CIRCUIT (1) Check the continuity between AWD mode switch harness connector and ground. DTC Items (CONSULT screen terms) Diagnostic item is detected when... Possible cause C1209 MODE SW More than two switch inputs are simulta- Malfunction of AWD mode switch or AWD mode switch Continuity Connector Terminal Condition M1 *1 M108 *2 2 3 AWD mode switch: 2WD Existed Except the above Not existed 2 6 AWD mode switch: 2WD Not existed AWD mode switch: AUTO Existed AWD mode switch: LOCK 2 8 AWD mode switch: LOCK Existed Except the above Not existed |