|
|
P0826 UP AND DOWN SHIFT SW TM-331 < DTC/CIRCUIT DIAGNOSIS > [CVT: RE0F10D] C E F G H I J K L M A B TM N O P P0826 UP AND DOWN SHIFT SW DTC Logic INFOID:0000000010589322 DTC DETECTION LOGIC DTC CONFIRMATION PROCEDURE 1. PREPARATION BEFORE WORK If another “DTC CONFIRMATION PROCEDURE” occurs just before, turn ignition switch OFF and wait for at >> GO TO 2. 2. CHECK DTC DETECTION (PART 1) With CONSULT 1. Start the engine. 2. Shift the selector lever to “D” position and wait for 1 second or more. 3. Select “Self Diagnostic Results” in “TRANSMISSION”. Is “P0826” detected? YES >> Go to NO >> GO TO 3. 3. CHECK DTC DETECTION (PART 2) With CONSULT 1. Shift the selector lever to instruction shift gate and wait for 1 second or more. 2. Select “Self Diagnostic Results” in “TRANSMISSION”. Is “P0826” detected? YES >> Go to NO >> GO TO 4. 4. CHECK DTC DETECTION (PART 3) With CONSULT 1. Shift the selector lever to “UP side (+ side)” and wait for 1 second or more. 2. Select “Self Diagnostic Results” in “TRANSMISSION”. Is “P0826” detected? YES >> Go to NO >> GO TO 5. 5. CHECK DTC DETECTION (PART 4) With CONSULT 1. Shift the selector lever to “DOWN side ( − side)” and wait for 1 second or more. 2. Select “Self Diagnostic Results” in “TRANSMISSION”. Is “P0826” detected? YES >> Go to NO >> INSPECTION END Diagnosis Procedure INFOID:0000000010589323 1. CHECK DTC (COMBINATION METER) With CONSULT DTC Trouble diagnosis name DTC detection condition Possible causes P0826 Up and Down Shift Switch Cir- TCM monitors instruction mode, non-instruction • Instruction mode switch (Instruction mode switch circuit are open |